|
|
 |
|
 |
Design Specifications
Lumeah Limestone handcrafted paved pouring is a versatile, long lasting, competitively priced product that looks as good after a few years as it does on the day it was laid.
Ideal for paths, steps, driveways and pool surrounds, here is a clean, low maintenance alternative to those large dull grey areas of concrete, asphalt
and pavers.
Lumeah Limestone handcrafted poured paving is a mixture of crushed calciferous limestone quarried in Western Australia.
It is mixed with quality Type A Cockburn Creme Cement, additives and water, forming a slurry that is then poured to the required design.
A compacted layer of clean, coarse sand forms a solid base beneath the pour.
A minimum thickness of 70 mm is used for pedestrian areas. A 100 mm thickness with reinforcing if required, will be utilised on heavy traffic areas as per engineer's specifications.
Joints, edging and inlays are set as per architect's or designer's plans.
Drainage, soakwells, gatic drains etc., if required are also installed before pouring commences.
Weather is a determining factor when working with a product like poured paving. Delays are inevitable if weather is particularly adverse and wet.
The finished product conforms to construction tolerances and is to be free draining at all times.
As with all natural products, there may be slight colour variations.
|
|
|
